Training Class Schedules

*Restricted*

test's

There are four different types of aerial lifts. Articulating, Boom Truck, Scissor and Telescopic.  Starting 11/20/13, this online safety training program serves as the first step towards obtaining an aerial lift operators license.  It will also serve as retraining for current operators whose certification has expired. Please complete the lesson for each type of lift you will be operating. Once all lessons are completed and quizzes passed, contact Curt Porterfield (cuporter@vt.edu) to schedule your skills observation.

Is training mandatory?  If so, when?  Yes.  Persons who perform maintenance, renovation, or custodial operations, and persons who work around/on asbestos must attend this training.

Class length:  1 hour

Available online:  No

When is refresher training required?  Annually

Select Agent and Toxin Annual Refresher Training

Online referesher training (via Canvas) with quiz

Introduction to proper use and maintenaince of biological safety cabinets

Is training mandatory?  Lab waste management training is currently required for lab workers working in a laboratory in which hazardous chemicals and/or biological agents are used.

Class length:  Approximately 1 hour

Available online:  Yes

When is refresher training required?  Every year, as required by the Virginia DEQ.

Ensure that all Responsible Technicians and autoclave users are trained and have the necessary support to implement an autoclave use and verification program.

This training provides instruction on how to perform four types of hazard assessment: Personal Protective Equipment, Control Banding, Job Hazard Analysis, and 'What-If' Analysis.  Participants should bring with them one example of an experimental procedure or SOP that is currently being used by their workgroup.

The ‘Biosafety for Research Labs’ training module provides bloodborne pathogens (BBP) training that is appropriate ONLY for people working in biological/ biomedical research laboratories and related settings.   If you do not work in such a research laboratory or related setting, DO NOT TAKE THIS TRAINING MODULE TO FULFILL YOUR BBP TRAINING REQUIREMENT.

This comprehensive online module has replaced all previously-required CITI biosafety trainings for lab workers/researchers, AND can include Bloodborne Pathogens (BBP) training for those who need it. 

To receive the BBP-inclusive version, answer YES to the question “Do you work with human/NHP materials (including human tissue cultures)?” when you register for the training.  Those who answer NO will receive biosafety training without BBP, so be sure you answer the question in accordance with your training needs.  If in doubt, answer YES to cover all contingencies.
Successful completion of this biosafety training without BBP will be recorded in your EHS training profile with a 3-year expiration.
Successful completion of the BBP-inclusive version of this training will give you credit for both biosafety and BBP training in your EHS training profile with a 1-year expiration.  In interim years when you take the training, the system will launch a BBP-only refresher for research laboratorians, NOT the full biosafety module.  The database will track your record and launch the full module every 3 years.

 The EHS Exempt Specimen Shipping module supplies required training for:

-- Classifying non-pathogenic or “exempt animal or human (patient) specimens” that have no other dangerous goods associated with them such as chemical (formalin, ethanol, buffers, etc.) and

-- Properly packaging them for shipping.

To be in compliance with regulations for shipping exempt specimens, you must receive documented training every two years.  You can be fined if you ship this type of material without being trained, or if your training has expired.

Some exempt specimens must be shipped with dry ice.  To ship with dry ice, documented training is also required.  Take EHS Dry Ice Shipping training to satisfy this requirement and to learn how to ship safely with dry ice.

The ‘Biosafety for Research Labs’ training module provides bloodborne pathogens (BBP) training that is appropriate ONLY for people working in biological/ biomedical research laboratories and related settings.   If you do not work in such a research laboratory or related setting, DO NOT TAKE THIS TRAINING MODULE TO FULFILL YOUR BBP TRAINING REQUIREMENT.

This comprehensive online module has replaced all previously-required CITI biosafety trainings for lab workers/researchers, AND can include Bloodborne Pathogens (BBP) training for those who need it. 

To receive the BBP-inclusive version, answer YES to the question “Do you work with human/NHP materials (including human tissue cultures)?” when you register for the training.  Those who answer NO will receive biosafety training without BBP, so be sure you answer the question in accordance with your training needs.  If in doubt, answer YES to cover all contingencies.
Successful completion of this biosafety training without BBP will be recorded in your EHS training profile with a 3-year expiration.
Successful completion of the BBP-inclusive version of this training will give you credit for both biosafety and BBP training in your EHS training profile with a 1-year expiration.  In interim years when you take the training, the system will launch a BBP-only refresher for research laboratorians, NOT the full biosafety module.  The database will track your record and launch the full module every 3 years.

for non-research personnel ONLY. standing zoom session. link will be sent to registrants 30-60 minutes before the class.

for non-research personnel ONLY. standing zoom session link will be sent to registrants 30-60 minutes before the class

for non-research personnel ONLY. standing zoom session. link will be sent to registrants 30-60 minutes before the class.

for non-research personnel ONLY. standing zoom session link will be sent to registrants 30-60 minutes before the class

Is training mandatory?  If so, when?  Yes.  Persons who use chainsaws must attend this training. Information regarding chain saw maintenance and practices is provided, along with personal protective equipment requirements.

Class length:  1 hour

Available online:  Yes

When is refresher training required?  5 years

Is training mandatory?  Lab safety training is currently required in many curriculum, and lab safety training in mandated if working in a laboratory in which hazardous chemicals are manipulated in research.  

Class length:  Approximately 1 hour

Available online:  Yes

When is refresher training required?  Every 2 years.

Is training mandatory?  Lab waste management training is currently required for lab workers working in a laboratory in which hazardous chemicals and/or biological agents are used.

Class length:  Approximately 1 hour

Available online:  Yes

When is refresher training required?  Every year, as required by the Virginia DEQ.

Teaches proper procedures for shipping non hazardous or non regulated materails on dry ice.

For assistance with shipping hazardous materials, contact Michael Miles (biologicals) at 231-5864 or Kenny Osborne (chemical/radiological) at 231-2509.

Formaldehyde Safety

The EHS Hydrofluoric Acid Safety module is required training for all users of hydrofluoric acid (HF), and for those working in areas where HF is used.  Both groups must be fully aware of HF’s hazards for their own safety.  HF is a highly dangerous corrosive and toxic material.  Work practices for safe handling and specialized training for emergency response, provided in this module, must be mastered by trainees prior to using HF, and strictly adhered to whenever using HF. 

Trainees are encouraged to contact EHS (231-3600) with any questions or concerns regarding the presence or use of this chemical in their research settings.  EHS provides on-site consultations to advise and support research groups with their lab-specific HF safety practices; please call 231-3600 if you would like to schedule a consultation. 

When is refresher training required?  Every 2 years.

This training provides instruction on how to perform four types of hazard assessment: Personal Protective Equipment, Control Banding, Job Hazard Analysis, and 'What-If' Analysis.  Participants should bring with them one example of an experimental procedure or SOP that is currently being used by their workgroup.

Is training mandatory?  Lab waste management training is currently required for lab workers working in a laboratory in which hazardous chemicals and/or biological agents are used.

Class length:  Approximately 1 hour

Available online:  Yes

When is refresher training required?  Every year, as required by the Virginia DEQ.

Is training mandatory?  If so, when?  No.  However, persons who work with compressed gases outside of a chemical research laboratory must have Hazard Communication training.   Awareness level training is available for safe handling, storage, and use of compressed gas cylinders.

Class length:  1 hour

Available online:  Yes

When is refresher training required?  5 years

Is training mandatory?  If so, when?  Yes.  Persons who work around, but not in, confined spaces must have this training.

Class length:  1 hour

Available online:  Yes

When is refresher training required?  5 years

 EHS Classroom

Consistent with OSHA guidelines, anyone participating in EHS classes via Zoom are required to (a) have a working webcam/camera, which will remain on with the student(s) visible except during breaks, (b) have a microphone, and (c) actively participate in the class.  Persons who are unable to meet these requirements should register for and attend training in-person. If you join via Zoom and do not meet the participation requirement you will not receive credit for attending the class.

 EHS Classroom

Is training mandatory?  If so, when?  Yes.  Each supervisor who interacts with contractors must take this class.

Class length:  1 hour

Available online:  No

Refresher training required?  5 years

This is the primary course provided for the Virginia Tech community.

Is training mandatory?  If so, when?  Yes.  Persons who use or work around mobile cranes must attend this training.

Class length:  1 hour

Available online:  Yes

When is refresher training required?  5 years

Is training mandatory?  If so, when?  Yes.  Persons who use or work around overhead cranes must attend this training.

Class length:  2 hours

Available online:  Yes

When is refresher training required?  3 years

Is training mandatory?  If so, when?  Yes.  Persons who use or work around overhead cranes must attend this training.

Class length:  2 hours

Available online:  Yes

When is refresher training required?  3 years

Is training mandatory?  If so, when?  Yes.  Persons who use or work around mobile cranes must attend this training.

Class length:  1 1/2 hours

Available online:  No

When is refresher training required?  Every 5 years

Teaches proper procedures for shipping non hazardous or non regulated materails on dry ice.

For assistance with shipping hazardous materials, contact Michael Miles (biologicals) at 231-5864 or Kenny Osborne (chemical/radiological) at 231-2509.

Is training mandatory?  No.  Persons who use temporary power taps, such as extension cords, power strips, and ground-fault circuit-interrupters (GFCI) in their work area should take this class.

Class length:  1 hour

Available online:  Yes

When is refresher training required?  Every 5 years.

EHS Classroom - Health and Safety Building
Lower Level
575 Beamer Way

 Electrical Qualified Person

Canvas Course - you must email rmmiller@vt.edu for access.

This class is for personnel performing electrical research applications greater than 50 volts.

Is training mandatory?  Yes. Hazardous waste management training is currently required for facilitiy, shop, or other non-laboratory workers who may work with hazardous or universial waste materials.

Class length:  Approximately 1 hour

Available online:  Yes

When is refresher training required?  Every three years.

Is training mandatory?  If so, when?  Yes.  Persons who operator a facility with underground sotrage tanks must attend this training. Information regarding spill prevtion and response is provided.

Class length:  1 hours

Available online:  No

When is refresher training required?  1 year

Is training mandatory?  If so, when?  Yes.  Persons who work in or around excavations must attend this training.

Class length:  1 hour

Available online:  Yes

When is refresher training required? 5 years

EHS classroom

Is training mandatory?  If so, when?  Yes.  Persons who oversee excavations operations must attend this training.

Class length:  3 hours

Available online:  No

When is refresher training required?  Every 3 years

Is training mandatory?  If so, when?  Yes.  Persons who work near potential fall hazards of 4 ft or more must attend this training.

Class length:  1 hour

Available online:  Yes

When is refresher training required?  5 years

 EHS Classroom

Consistent with OSHA guidelines, anyone participating in EHS classes via Zoom are required to (a) have a working webcam/camera, which will remain on with the student(s) visible except during breaks, (b) have a microphone, and (c) actively participate in the class.  Persons who are unable to meet these requirements should register for and attend training in-person. If you join via Zoom and do not meet the participation requirement you will not receive credit for attending the class.

Is training mandatory?  If so, when?  Yes.  Persons who are exposed to fall hazards of 4 ft or more where a personal fall arrest system must be used must attend this training.

Class length:  3 hours

Available online:  No

When is refresher training required?  Every 3 years

 EHS Classroom

Consistent with OSHA guidelines, anyone participating in EHS classes via Zoom are required to (a) have a working webcam/camera, which will remain on with the student(s) visible except during breaks, (b) have a microphone, and (c) actively participate in the class.  Persons who are unable to meet these requirements should register for and attend training in-person. If you join via Zoom and do not meet the participation requirement you will not receive credit for attending the class.

Is training mandatory?  If so, when?  Yes.  Persons who are exposed to fall hazards of 4 ft or more where a personal fall arrest system must be used must attend this training.

Class length:  3 hours

Available online:  No

When is refresher training required?  Every 3 years

 EHS Classroom

 Is training mandatory?  If so, when?  Yes.  Persons who are exposed to fall hazards of 4 ft or more where a personal fall arrest system must be used must attend this training.

Class length:  3 hours

Available online:  No

When is refresher training required?  Every 3 years

Is training mandatory?  If so, when?  Yes.  Persons who oversee the use of agricultural equipment that incorporate power take-offs, exposed moving parts or similar hazards must attend this training. This person is to provide needed on-site training for other employees at this work location.

Class length:  2 hours

Available online:  Yes

When is refresher training required?  Annually

Is training mandatory?  If so, when?  No, training is optional and recommended for those departments that store/use quantities of flammable or combustible liquids.  Departments (non-research laboratories) are required to develop fire prevention plan to address flammable/combustible liquid safety.

Class length:  1 hour

Available online:  Yes

When is refresher training required?  5 years

Is training mandatory?  If so, when?  Yes.  Departments that perform welding, cutting, brazing, torch cutting, soldering and similar open-flame operations must designate a hot work coordinator and implement a hot work permit program.

Class length:  1 hour

Available online:  Yes

When is refresher training required?  5 years

Is training mandatory?  If so, when?  Yes.  Personnel who are expected to use fire extinguishers, such as laboratory personnel, those performing hot work, those serving as a fire watch, etc. must attend this training.

Class length:  1 hour

Available online:  Yes

When is refresher training required?  Every 1 to 2 years

Upcoming classes:  For groups of 10 or more, on site training is available upon request. 

Please see the online class schedule for regularly scheduled classes.

FA/CPR/AED-All Ages

Online and by Appointment

Beginning August 1, 2020, we moved to a blended learning format. Students will complete the classroom portion online, then come to EHS and complete the skills verification at a scheduled time. The cost of Adult CPR, AED and First classes are $45.00, payable through VT Continuing and Professional Education.

https://register.cpe.vt.edu/search/publicCourseSearchDetails.do?method=load&courseId=295106

Use the EHS Training Schedule to “Request a CPR Class.” You will be directed automatically to the CPE website to provide payment information.

Do not send departmental ISRs directly to VT EHS for First Aid/CPR/AED-Adult training.

When VT CPE informs EHS of payment, EHS will enroll you in the online class. Participants receive an e-mail link to the classroom portion.

Once the classroom portion is completed, you will receive an email and be able to book an appointment for a skills verification.

On your training profile, you will see an “Appointments” tab. The appointments tab shows upcoming skills sessions and allows you to select one convenient for you. Skills verifications take less than 1.5 hours.

Upon completion, you’ll receive your certification by email.

NOTE:  Available to VT employees only.  Not open to the public.

Is training mandatory?  If so, when?  Yes.  All persons who perform flagging operations on roadways must attend this training.

Class length:  1 hour

Available online:  No

When is refresher training required?  Every 2 years

Is training mandatory?  Lab waste management training is currently required for lab workers working in a laboratory in which hazardous chemicals and/or biological agents are used.

Class length:  Approximately 1 hour

Available online:  Yes

When is refresher training required?  Every year, as required by the Virginia DEQ.

General Hand and Power Tool Safety

This training provides instruction on how to perform four types of hazard assessment: Personal Protective Equipment, Control Banding, Job Hazard Analysis, and 'What-If' Analysis.  Participants should bring with them one example of an experimental procedure or SOP that is currently being used by their workgroup.

The EHS Hydrofluoric Acid Safety module is required training for all users of hydrofluoric acid (HF), and for those working in areas where HF is used.  Both groups must be fully aware of HF’s hazards for their own safety.  HF is a highly dangerous corrosive and toxic material.  Work practices for safe handling and specialized training for emergency response, provided in this module, must be mastered by trainees prior to using HF, and strictly adhered to whenever using HF. 

Trainees are encouraged to contact EHS (231-3600) with any questions or concerns regarding the presence or use of this chemical in their research settings.  EHS provides on-site consultations to advise and support research groups with their lab-specific HF safety practices; please call 231-3600 if you would like to schedule a consultation. 

When is refresher training required?  Every 2 years.

Is training mandatory? If so, when: Yes, This training applies to all non-laboratory and laboratory work spaces where employees are exposed to hazardous chemicals or products. This training should be accomplished before any employee begins a work assignment in which they will use or handle hazardous chemicals or products.  This training is the minimum requirement to fulfill the GHS training as mandated by OSHA.

Class length: 30 min

Available online: Yes

When is refresher training required? Training required upon initial hire and when a new hazardous chemical is introduced into the workplace.

Is training mandatory?  If so, when?  Yes.  EHS provides training to designated department coordinators on how to implement a hazard communication program.  The department is required to train all affected employees who use hazardous chemicals..

Class length:  On Line

Available online:  Yes

When is refresher training required?  5 years

Is training mandatory?  If so, when?  Hearing Conservation training is provided during the scheduled annual audiogram.

Class length:  Included in annual audiogram

Available online:  No

When is refresher training required?  Annually

Upcoming classes:  Included during your annual audiometric testing. 

EHS will contact you to schedule. 

upon request

Is training mandatory?  No. This class is strongly encoruages for groups who have potential for exposures to infectious disease that do not fall under the OSHA BBP standard.

Class length:  1 hour

Available online:  No

When is refresher training required?  No

Is training mandatory?  Lab safety training is currently required in many curriculum, and lab safety training in mandated if working in a laboratory in which hazardous chemicals are manipulated in research.  

Class length:  Approximately 1 hour

Available online:  Yes

When is refresher training required?  Every 2 years.

Is training mandatory?  Lab waste management training is currently required for lab workers working in a laboratory in which hazardous chemicals and/or biological agents are used.

Class length:  Approximately 1 hour

Available online:  Yes

When is refresher training required?  Every year, as required by the Virginia DEQ.

Teaches proper procedures for shipping non hazardous or non regulated materails on dry ice.

For assistance with shipping hazardous materials, contact Michael Miles (biologicals) at 231-5864 or Kenny Osborne (chemical/radiological) at 231-2509.

Formaldehyde Safety

The EHS Hydrofluoric Acid Safety module is required training for all users of hydrofluoric acid (HF), and for those working in areas where HF is used.  Both groups must be fully aware of HF’s hazards for their own safety.  HF is a highly dangerous corrosive and toxic material.  Work practices for safe handling and specialized training for emergency response, provided in this module, must be mastered by trainees prior to using HF, and strictly adhered to whenever using HF. 

Trainees are encouraged to contact EHS (231-3600) with any questions or concerns regarding the presence or use of this chemical in their research settings.  EHS provides on-site consultations to advise and support research groups with their lab-specific HF safety practices; please call 231-3600 if you would like to schedule a consultation. 

When is refresher training required?  Every 2 years.

Is training mandatory?  If so, when?  Yes.  Departments that have machine shops, woodworking shops or similar operations must designate a machine shop coordinator and implement a machine shop safety program.

Each person who uses shop equipment must receive training (by the Shop Safety Coordinator or other designee) prior to use on the following topics:

• Shop guidelines such as housekeeping and access,
• Shop hazards and methods of controlling exposure,
• Machine-specific operating guidelines and safety features,
• Use and care of prescribed personal protective equipment.

Available online:  Yes - this course offers general information on machine shop safety and requirements.  Machine-specific training must be coordinated with the departmental Machine Shop Coordinator.

 When is refresher training needed? 5 years

This training provides instruction on how to perform four types of hazard assessment: Personal Protective Equipment, Control Banding, Job Hazard Analysis, and 'What-If' Analysis.  Participants should bring with them one example of an experimental procedure or SOP that is currently being used by their workgroup.

Is training mandatory?  If so, when?  Yes.  Persons who climb ladders that incorporate ladder safety devices (e.g., fall protection) must attend this training. It is recommended that all personnel who use general purpose ladders also attend this training (or the supervisor must assure the employee knows how to use this equipment safely).

Class length:  1 hour

Available online:  Yes

When is refresher training required?  5 years

Is training mandatory?  If so, when?  Yes.  Persons who work with laser classes 3R, 3B, or 4 must attend this training.

Class length:  1 hour

Available online:  No

When is refresher training required?  not required

Is training mandatory?  If so, when?  Yes.  Persons who perform maintenance or renovation work, or who work with lead materials in the course of their duties must attend this training.

Class length:  1 hour

Available online:  No

When is refresher training required?  Annually

Is training mandatory?  If so, when?  No.  General awareness training on the requirements of this program is available upon request.

Class length:  1 hour

Available online:  Yes

When is refresher training required? 5 years

EHS Classroom

Consistent with OSHA guidelines, anyone participating in EHS classes via Zoom are required to (a) have a working webcam/camera, which will remain on with the student(s) visible except during breaks, (b) have a microphone, and (c) actively participate in the class. Persons who are unable to meet these requirements should register for and attend training in-person. If you join via Zoom and do not meet the participation requirement you will not receive credit for attending the class. 

EHS Classroom

The Lockout/Tagout Program defines procedures for the control of hazardous energy sources in order to prevent injuries during the service or maintenance of machinery or equipment.

Wood Shop Safety for CUAS - School of Architecture and Design Students. Required prior to use of Burchard Hall 121.

General Hand and Power Tool Safety

Is training mandatory?  If so, when?  Yes.  Departments that have machine shops, woodworking shops or similar operations must designate a machine shop coordinator and implement a machine shop safety program.

Each person who uses shop equipment must receive training (by the Shop Safety Coordinator or other designee) prior to use on the following topics:

• Shop guidelines such as housekeeping and access,
• Shop hazards and methods of controlling exposure,
• Machine-specific operating guidelines and safety features,
• Use and care of prescribed personal protective equipment.

Available online:  Yes - this course offers general information on machine shop safety and requirements.  Machine-specific training must be coordinated with the departmental Machine Shop Coordinator.

 When is refresher training needed? 5 years

EHS Classroom

Is training mandatory?  If so, when?  Yes.  Departments that have machine shops, woodworking shops or similar operations must designate a machine shop coordinator and implement a machine shop safety program. The coordinator must attend this training.

Class length: 3 hours

Available online:  No

When is refresher training required?  5 years

Is training mandatory?  If so, when?  No.  General awareness training on the requirements of this program is available upon request.

Class length:  1 hour

Available online:  Yes

When is refresher training required?  5 years

This training provides instruction on how to perform four types of hazard assessment: Personal Protective Equipment, Control Banding, Job Hazard Analysis, and 'What-If' Analysis.  Participants should bring with them one example of an experimental procedure or SOP that is currently being used by their workgroup.

Is training mandatory?  If so, when?  Yes.  Persons who operator a facility with underground sotrage tanks must attend this training. Information regarding spill prevtion and response is provided.

Class length:  1 hours

Available online:  No

When is refresher training required?  1 year

Is training mandatory?  If so, when?  Yes.  Persons who use forklifts, powered pallet jacks, order pickers, and similar equipment must be trained and certified prior to using this equipment. A train-the-trainer program is also available for departments that wish to certify their own users.

Class length:  1 hour

Available online:  Yes

When is refresher training required?  Every 3 years

Is training mandatory?  If so, when?  Yes.  All users of Analytical X-ray instruments must complete this training prior to working with the equipment.

Available online:  Yes

When is refresher training required?  Every 5 years

Is training mandatory?  If so, when?  Yes.  All users of Cabinet X-ray units must complete this training prior to working with the equipment.

Available online:  Yes

When is refresher training required? Every 5 years.

Is training mandatory?  If so, when?  Yes.  All users of Diagnostic X-ray equipment designated as "Holders"  must take this training prior to working with the equipment.  Please designate location as either VTH or EMC.  If you are designated as an X-ray Operator, please refer to that training.  

Available online:  Yes

When is refresher training required?  Every 5 years.

Is training mandatory?  If so, when?  Yes.  All involved when radioisotopes are used in diagnostic procedures must attend this training, 'Nuclear Medicine Training for Ancillary Personnel' prior to working with patients. It is unique for the VTH location. This training is NOT for Principal Users.

Available online:  Yes

When is refresher training required?  The class should be retaken after 10 years of upon request by the Supervisor or Radiation Safety Officer.

Is training mandatory?  If so, when?  Yes.  All involved when radioisotopes are used in diagnostic procedures must attend this training 'Nuclear Medicine Training for Ancillary Personnel' prior to working with patients.  It is unique for the EMC location.  This training is NOT for Principal Users.

Available online:  Yes

When is refresher training required?  The class should be taken again after 10 years or upon request by the Supervisor and/or the University Radiation Safety Officer.

Is training mandatory?  If so, when?  Yes.  All users of Diagnostic X-ray equipment designated as "Operators" must take this training prior to working with the equipment.  Please designate location as either VTH or EMC.  If you are functioning both as an Operator and Holder, you need only enroll in this class. 

Available online:  Yes

When is refresher training required?  Every 5 years

Offered Online

This training provides information that certifies individuals for safe use of radioactive sealed sources.

Is training mandatory?  Lab waste management training is currently required for lab workers working in a laboratory in which hazardous chemicals and/or biological agents are used.

Class length:  Approximately 1 hour

Available online:  Yes

When is refresher training required?  Every year, as required by the Virginia DEQ.

Silica Awareness Online

This on-line respiratory protection training is available to all users of respiratory protection devices.

Class length:  30 minutes (including 10-question quiz)

Refresher training is required annually if you continue the use of a respirator.

If you have any questions about the registration process or the program, contact the Repiratory Protection Program Administrator at 540-231-2509.

This training is required for anyone who operates General Industry and Construction Industry vehicles, machinery or equipment capable of operating in reverse and with an obstructed view to the rear or is a designated Ground Guide.

Refresher training required? 5 years

Is training mandatory?  If so, when?  Yes.  Personnel accessing scaffolding to perform work tasks must attend awareness level training in safe work practices, and to ensure that related hazards are recognized and corrected prior to scaffold use.

Class length:  1 hour

Available online:  Yes

When is refresher training required?  5 years

Silica Awareness Online

Is training mandatory?  Lab waste management training is currently required for lab workers working in a laboratory in which hazardous chemicals and/or biological agents are used.

Class length:  Approximately 1 hour

Available online:  Yes

When is refresher training required?  Every year, as required by the Virginia DEQ.

Is training mandatory?  Yes. Hazardous waste management training is currently required for facilitiy, shop, or other non-laboratory workers who may work with hazardous or universial waste materials.

Class length:  Approximately 1 hour

Available online:  Yes

When is refresher training required?  Every three years.

Is training mandatory? If so, when? Yes. Persons who perform welding, cutting or brazing must attend this training.

Class length:  1 hour

Available online:  Yes

When is refresher training required?  5 years

Is training mandatory?  If so, when?  Yes.  Departments that perform welding, cutting, brazing, torch cutting, soldering and similar open-flame operations must designate a hot work coordinator and implement a hot work permit program.

Class length:  1 hour

Available online:  Yes

When is refresher training required?  5 years

Is training mandatory?  If so, when?  Yes.  All users of Analytical X-ray instruments must complete this training prior to working with the equipment.

Available online:  Yes

When is refresher training required?  Every 5 years

Is training mandatory?  If so, when?  Yes.  All users of Cabinet X-ray units must complete this training prior to working with the equipment.

Available online:  Yes

When is refresher training required? Every 5 years.

Is training mandatory?  If so, when?  Yes.  All users of Diagnostic X-ray equipment designated as "Holders"  must take this training prior to working with the equipment.  Please designate location as either VTH or EMC.  If you are designated as an X-ray Operator, please refer to that training.  

Available online:  Yes

When is refresher training required?  Every 5 years.

Is training mandatory?  If so, when?  Yes.  All users of Diagnostic X-ray equipment designated as "Operators" must take this training prior to working with the equipment.  Please designate location as either VTH or EMC.  If you are functioning both as an Operator and Holder, you need only enroll in this class. 

Available online:  Yes

When is refresher training required?  Every 5 years